67E RecordingYou can adjust hue, chroma, area and Y level to determine the skin area and soften the details toreduce the appearance of skin imperfections. A zebra pattern identifying the skin area appears,alternating with the normal picture (a white pattern appears on a connected TV or computer screen).Activating the Skin Detail FunctionOpen the menu and select [CAMERA SETUP] and [SKIN D.SET]. Select [SKIN DETAIL], set itto [HIGH ], [MIDDLE ] or [LOW ] and close the menu.“ “ appears.Determining the Skin AreaOpen the menu and select [CAMERA SETUP] and [SKIN D.SET]. Select [HUE], [CHROMA],[AREA] or [Y LEVEL], adjust the levels and close the menu.• HUE: Adjust the hue for detection of the skin area. Adjusting to [R] detects reddish skin color, and to [G]detects greenish skin color.• CHROMA: Adjust the saturation for detection of the skin area. Adjusting to [+] detects brighter skin color,and to [-] detects lighter skin color.• AREA: Adjust the color range for detection of the skin area. Adjusting to [+] detects a wide color range,and to [-] detects a narrow color range.• Y LEVEL: Adjust the brightness for detection of the skin area. Adjusting to [+] detects brighter skin color,and to [-] detects darker skin color.You cannot record on the tape while determining the skin area.Using the Skin Detail FunctionCAMERA SETUP SKIN D.SET SKIN DETAIL••OFF( 26)CAMERA SETUP SKIN D.SET HUE••••••••••G RCHROMA••••••• +-+-+-AREA•••••••••Y LEVEL••••••( 26)Downloaded From VideoCamera-Manual.com Manuals
