Canon ZR Instruction Manual

Canon ZR Instruction Manual Manual pdf 33 page image

Using the FullRange of Features34ESearching and Reviewing While RecordingWhen the camera is in record pausemode, you can use record search toplay the tape forwards or backwards tofind the point where you want to startor restart recording. This is useful whenyou want to add a new scene to apreviously used cassette. By usingrecord search, you can ensure a smooth,noise-free join between the new sceneand the old one.Record search1. Make sure the camera is in record pause mode.2. Press in the select dial to open the program menu (p. 36).• If the camera is set to [ (Easy Recording), you will enter record searchmode directly.3. Turn the select dial to select REC SEARCH.4. Press in the select dial to enter record search mode.• The record search options appear on the screen:Turn the select dial upwards to search forwards (line up the arrow with the +mark). Turn the dial downwards to search backwards (line up the arrow withthe - mark). When the arrow is at the center, the tape is stopped.• The camera returns to record pause mode automatically after approximately6 seconds when you are not searching the tape.5. Press in the select dial to leave record search mode• The camera returns to record pause mode.Note:• You cannot set record search while the camera is in mirror mode (with the LCDscreen facing the same direction as the lens), or without a tape loaded.+REC SEARCH–