AdditionalInformation68ETroubleshootingCause and/or what to do about it• The camera is not switched on(p. 13, 19).• The cassette is not loaded or is set forerasure prevention (p. 11-12).• The tape has reached the end.• The battery pack is exhausted or notproperly attached (p. 8, 9, 61).• The function cannot be used in thatrecording program (p. 36).• The camera was in record pause modefor more than about five minutes(p. 13).• The battery pack is exhausted (p. 9).• The POWER switch is not set to [or P (p. 13).• The LENS COVER switch is set toCLOSE (p. 13).• The cassette is not loaded or is set forerasure prevention (p. 11-12).• The tape has reached the end.• The POWER switch is not set to [or P (p. 13).• The LENS COVER switch is set toCLOSE (p. 13).• You are attempting to play back orrecord from a copyright protectedcassette (p. 59).• The tape heads are badlycontaminated (p. 65).Refer to this checklist first if you have any problems with your camcorder.Possible explanations are given for each problem on the list — turn to the pagenumbers in brackets for more information.Make sure that the camera is properly connected if you are using it with a TV orVCR. Consult your dealer or service outlet if problems persist.Recording/PlaybackProblem? Nothing happens when I press thebuttons? The camera turned itself off.? The start/stop button doesn’twork.? There’s no picture in the display.? There’s a blank blue screen in thedisplay.F321/200012:00AMJAN. 1,1998F321/200012:00:00 AMF321/2000F321/200012:00 AMJAN. 1,199812:00:00 AMJAN. 1,1998 F321/2000F321/2000JAN. 1,1998