94Recording from a Tape in the Camcorder1. Play back the tape.2. Press the PHOTO button halfway when the scene you wish to recordappears.• The camcorder pauses playback. The remaining image capacity and otherinformation appear.• When you press the PHOTO button on the wireless controller, recording startsimmediately.3. Press the PHOTO button fully.• The card access indicator flashes.• You can also record a still image by pressing the PHOTO button fully when the tapeis in playback pause mode.Recording from Other Video DevicesYou can record images from devices connected via the AV terminal (analog line-infunction), or via the DV terminal as still images on a memory card. For connectinginstructions, refer to page 35 and 77.1. Set the camcorder to PLAY (VCR) mode.• If a cassette is loaded, make sure that the tape is stopped.• When recording via the AV terminal, make sure that “AV DV” is displayed on thescreen. When recording via the DV terminal, make sure that “AV DV” is notdisplayed. Change the setting as necessary ( 82).2. Connected device: Load a recorded cassette and play back the tape.3. Press the PHOTO button halfway when the scene you wish to recordappears.• The still image, remaining image capacity and other information appear.• When you press the PHOTO button on the wireless controller, recording startsimmediately.4. Press the PHOTO button fully.The card access indicator flashes. When recording from a tape in the camcorder or other video devices:- A still image recorded from an image in widescreen mode will be verticallycompressed.- The data code of the still image will reflect the date and time it has beenrecorded on the memory card.- The size of the still image will be 640 x 480. When connecting with a DV cable, make sure that no USB cable is connectedto the camcorder.CAMERA PLAY (VCR) CARD CAMERA CARD PLAYCAMERA PLAY (VCR) CARD CAMERA CARD PLAY
