139AdditionalInformationEPlaybackEditingProblem Cause SolutionPressing the playback buttondoes not start playback.Camcorder is turned off, or isnot set to PLAY (VCR) mode.Set the camcorder to PLAY(VCR) mode.32The TAPE/CARD switch is setto CARD.Set the TAPE/CARD switch toTAPE.32Cassette is not loaded. Load a cassette. 16Tape reached the end(“ END” flashes on thescreen).Rewind the tape. 32Image will not appear on theTV screen.[AV DV] is set to [ON]. Set [AV DV] to [OFF]. 81Tape is running, but image willnot appear on the TV screen.TV/VIDEO selector on the TVis not set to VIDEO.Set the selector to VIDEO. 35Video heads are dirty. Clean the video heads. 132You attempted to play back ordub copyright protected tape.Stop playback/dubbing. –No sound from the built-inspeaker.Speaker volume is turned off. Adjust the volume with theSET dial.34Problem Cause SolutionDubbing via the camcorder'sDV terminal does not work.[AV DV] is set to [ON]. Set [AV DV] to [OFF]. 81Wrong signal format. Dubbing may work via the AVterminal.Refer also to the instructionmanual of the connecteddevice.–
