845. Press the AUDIO DUB. button on the wirelesscontroller.“AUDIO DUB.” and “ ” appear.6. Press the PAUSE button on the wireless controllerto begin dubbing.• Audio device: Begin playback.• Microphone: Speak into the microphone.7. Press the STOP button on the wireless controllerto stop dubbing.Audio device: Stop playback. Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.Audio dubbing will stop if the tape has a blank section or a section recorded inLP mode or 16-bit mode. You cannot use the DV terminal for audio dubbing. If you add sound to a tape not recorded with this camcorder, sound quality maydecrease. Sound quality may decrease when you add sound to the same scene for morethan 3 times. When you connect an audio device, check the picture on the LCD screen andthe sound via built-in speaker or audio device. When you use the microphone, you can check the picture on a TV connectedvia the AV terminal and the sound via headphones connected to the TV. Set the zero set memory at the end of the scene you wish to dub audio. Thecamcorder will automatically stop audio dubbing at that point.PAUSE SLOWAUDIO DUB. ZERO SETMEMORY TV SCREENPLAYSTOPPAUSE SLOWAUDIO DUB. ZERO SETMEMORY TV SCREENPLAYSTOPPAUSE SLOWAUDIO DUB. ZERO SETMEMORY TV SCREEN
