30EMasteringthe Basics• Attach the DU-300 Docking Unit in order to use the S-video terminal ( 29).• Use the S-150 S-video Cable to connect the S-video terminals. Use theSTV-250N Stereo Video Cable to connect the AUDIO terminals. Connect thewhite plug to the white AUDIO terminal L (left). Connect the red plug to the redAUDIO terminal R (right). Do not connect the yellow plug.• If you are connecting the camera to a TV, set the TV/VIDEO selector on thetelevision to VIDEO.• If you are connecting the camera to a VCR, set the input selector on the VCR toLINE.VIDEOS(S1)-VIDEOINPUTAUDIOLRSIf your TV (or VCR) has an S (S1) -video input terminalFor higher picture quality, we recommend playing back recordings on a TV withan S (S1) terminal. If you connect the camera to a TV with an S1 terminal or theVideo ID-1 system, recordings made in the 16:9 mode for wide screen TVs willautomatically play back in wide screen mode on the TV screen.S-150 S-video CableSTV-250N Stereo Video CableSpecificationsS-video terminal input/output 1 Vp-p (Y signal), 0.286 Vp-p (C signal)Microphone terminal ø 3.5 mm stereo minijack, –57 dBV (with600 ohm mic)/at least 5 kohmsHeadphone terminal ø 3.5 mm stereo minijackLANC uu terminal ø 2.5 mm mini minijackDimensions 3 × 1 1/8 × 2 1 /4 in (77 × 29 × 56 mm)Weight 1 3/4 oz (50 g)Weight and dimensions are approximate.Erorrs and omissions excepted.Subject to change without notice.
