44EUsing the FullRange of FeaturesTo prevent interference from otherCanon wireless controllers being usednearby, there are 2 remote sensormodes and an off setting. The wirelesscontroller and the camera have to be setto the same mode in order to becompatible.When Operating 2 Canon DV Camcorders (Remote Sensor Mode)To turn the remote sensor off:Open the menu and select SYSTEM. Then select WL.REMOTE, set it to OFFB and close the menu.• B appears in the display.To change the mode......on the camera:Open the menu and select SYSTEM. Then select WL.REMOTE, set it toA 1 or A 2 and close the menu.• The selected mode will appear on the display for 4 seconds....on the wireless controller:Press and hold the REMOTE SET button on the wireless controller.Simultaneously press the ZOOM W button for mode 1 or the ZOOMT button for mode 2. Continue to press simultaneously for over 2seconds.• Be sure to set the wireless controller to the same mode as the camera.A 1 : Mode 1A 2 : Mode 2OFFB : Sensor offWL.REMOTE••• 1SYSTEM( 35)The wireless controller and the camera have been preset to mode 1. If you changethe mode on the camera, be sure to change the mode on the wireless controller tothe same mode.REMOTEZOOMW TSETCARDR E CCARDPLAYMOVIE P.SCAN VCR
