Canon iPF760 series Service Manual

Also see for iPF750 series: Service manual Service manual

Contents

Chapter 22-212.3.2.3.2 Structure of Carriage Unit0023-2472iPF765 / iPF760 / iPF750 / iPF755a) Printhead mounting unitThe printhead is secured to the carriage by the printhead fixer lever.When the printhead is secured to the carriage, the signal contact of the carriage PCB touches the signal contact point of the printhead, allowing print signals to betransmitted.The ink passage from the ink tank is connected to the printhead through the ink tube and joint.b) Ink portInk is supplied to the printhead via an ink tube, which is connected to ink joints, and runs between the tube guides to reach the carriage and follow its movement.F-2-12c) Control unitThe carriage PCB is connected to the main controller PCB with a flexible cable. The flexible cable moves in conjunction with the carriage.A photo-coupler-type encoder is mounted at the top of the rear of the carriage to detect the slit on the linear scale during carriage movement, thus controlling theprint timing.d) Carriage driveMechanical misregistrations in the vertical/horizontal and bidirectional print positions of the printhead mounted can be corrected by selecting Adjust Printer fromthe main menu to shift the print timing.A DC-operated carriage motor drives the carriage reciprocally on the platen by way of the carriage belt.The carriage home position, or the capping position, is detected by the sensor flag on the right side of the carriage and the photointerrupter-based carriage HP sensoron the right side of the printer. When the linear scale position is set as a reference home position for use in subsequent position control operations, the carriage motoris driven by a control signal generated from the main controller PCB.e) Printhead maintenance unitThis printer cleans the printhead with the carriage halted at its home position.Wiping takes place through the rotation of the motor.Wiper blades mounted on the carriage wipe the printhead while the carriage is halted at its home position.Wet wiping is carried out for added wiping removal performance, whereby the wiper blades are moistened with glycerin as they are pressed against an absorberimpregnated with glycerin.Maintenance jet ejection is carried out on the cap, at the maintenance jet tray.A suction operation is carried out by a suction cap in the purge unit.Slant Adjustment LeverCarriage MotorInk TubeJoint for Ink SupplyPrinthead Fixer CoverPrinthead Fixer Lever Terminal