Canon iPF760 series Service Manual

Also see for iPF750 series: Service manual Service manual

Contents

Chapter 11-37*1: Available only if ManageRemainRoll is On.*2: Available only if Width Detection is set to Off.*3: Print Anyway is displayed when a job being held is selected.*4: Available after Auto(Advanced) in Head Posi. Adj. has been used once.*5: Available when you have specified Feed Priority > Adj. Priority > Automatic or Print Quality.*6: Available when you have specified Feed Priority > Adj. Priority > Automatic or Print Length.*7: Available only if Use Nesting is set to On.*8: Not shown if you have set IPv4 Mode to Manual.*9: Not shown if you have set NetWare to Off.*10: Not shown if you have set Auto Detect to On.*11: Follows the setting in Date Format.*12: Viewing and configuration is possible for administrators, and only viewing for other users.*13: Viewing and configuration is possible for administrators only.*14: Displayed only on models equipped with HDD.*15: Displayed only on models not equipped with HDD.*16: Leading edge is not available as a setting option in the Paper Detailed Settings dialog box of the printer driver.*17: Not displayed if IPv6 Support is Off.First Level Second Level Third Level Fourth Level Fifth Level[System Setup] [Nozzle Check] [Frequency] [Standard]*[1 page][Warning] [Off]*[On][Use USB]*12 [On]*[Off][Use Ethernet]*12 [On]*[Off][Use RemoteUI]*12 [On]*[Off][Reset PaprSetngs]*12[Erase HDD Data]*14 [High Speed]*12[Secure High Spd.]*12[Secure]*12[Output Method]*14 [Print]*[Print (Auto Del)][Save: Box XX][Print After Recv]*14 [Off]*[On][Save: Shared Box]*12*14 [Off][On]*[Show Job Log]*12 [Off][On][Prep.MovePrinter][Admin. Menu]*12 [Change Password]*13 (The screen for setting thepassword is displayed)[Init.Admin.Pswd]*13[Printer Info] [Paper Info][Ink Info][Head Info][System Info][Error Log][Other Counter]