Canon iR2030 Portable Manual
Also see for iR2018 Series: Service manualBrochure & specsBrochure & specsEasy operation guideService manual
                                                                                                                          | |
Contents
|
Chapter 5585.1.17.3 Test Mode Menu List (Touch Panel Type) 0017-6195iR2022i / iR2018iTest mode menu listTo invoke test mode, follow these steps:1) Enter service mode.Sequentially press the Additional functions key, 2 key, 8 key, and Additional functions key on the operation panel.2) Press the arrow key on the touch panel to display "TEST MODE".3) Press [OK].T-5-33(1) FUNCTION TEST G3 4800bps G3 4800 bps signal transmission test(3) 6-3 SENSOR [1] - [6] Sensor checks(1) SENSOR CHECK 0:NORMAL 1:LATCH(0) SENSOR NORMAL [0] - [2](0) CAS 0 REG 0 DEL 0 MULTI 0(1) TONER 0 FULL 0 2ND-DEL 0000(2) OP1 0000 OP2 0000 OP3 0000 PATH0000(1) SENSORLATCH [0] -[2](0) CAS 0 REG 0 DEL 0 MULTI 0(1) TONER 0 FULL 0 2ND-DEL 0000(2) OP1 0000 OP2 0000 OP3 0000 PATH0000(2) SWITCH CHECK [0] - [1](0) CAS 0000 LOCK 0000(1) OP1 0000 OP2 0000 OP3 0000(3) DS ON DES of HPS ON BCVS of(4) REF xxx ANT xxx |ANT-REF| xxx(5) BSCT on BDAC[ A3] BDSS3-0 [ of of of of ](6) NCR Sts: NCR xxxxx DPT MGN OK RDY 0101(7) LAST of EXIT of REG of CVR of(8) WID1 on WID2 on LEN1 on LEN2 on(9) D+Temp xxxx E+Hum xxxx F+Temp xxxx xxxx(4) ADF FEED TEST ADF delivery operation test(5) BOOK FEED TEST Book copy operation test(6) 6-6 SPEAKER FREQ:[1] VOL:[2] Speaker volume and buzzer frequency test(7) Not used(8) FUNCTION TEST LAMP TEST ALL Lamp test(9) LINE TEST [1] - [3] Line signal reception test(0) ROLLER CLEAN 0:PRT 1:ADF Printer and ADF roller cleaning(0) PRT ROL CLEAN Press start key(1) ADF ROL CLEAN Press start keyNumerals enclosed in parentheses denote a numeric keypad key to be pressed each.Group Subgroup Item 1 Item 2 Item 3 ExplanationTEST MODE [1] - [9], [#](1) DRAM [1] - [2] D-RAM data check(1) D-RAM TEST Write/read check(2) D-RAM TEST Read check(2) SCAN TEST [1] - [8](1) SHADING Automatic gain adjustment(3) SHEET POS ADJ CS position adjustment(4) TRASH DETECT Dust detection(5), (6), (9), (*) Not used(3) PRINT TEST [1] - [9](1) Not used(2) All-black output(3) Not used(4) Back belt output(5), (6), (7), (8), (9), (*) Not used(4) MODEM TEST [1] - [9]Numerals enclosed in parentheses denote a numeric keypad key to be pressed each.Group Subgroup Item 1 Item 2 Item 3 Explanation |
Related manuals for Canon iR2018 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine