COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001CHAPTER 6 TROUBLESHOOTING6-372.5 Fixing System2.5.1 Points to Note When Mounting the Fixing Heater1. Do not touch the surface of the heater directly.2. For both heaters, be sure that the side with the longer heater wire is toward the front.3. When viewing from the front, mount the main heater (1000 W for 100V model; 900 Wfor 208V model; 965W for 230V model) on the right and the sub heater (400 W for100V model; 600 W for 208V model; 645W for 230V model) on the left.4. When viewing from the rear, connect the faston for the heater at the rear so that the rightside is to the main heater and the top side is to the sub heater.Height of the Fixing Assembly Inlet GuideF06-205-01If you should remove the inlet guide base, you will have to adjust the posi-tion of the inlet guide. Do not loosen the fixing screw on the inlet guide. Ifyou must, be sure to put it back to its original position with reference to thescale on the fixing assembly base.5.8mm(referenceonly)5.8mm(referenceonly)FixingscrewFixingscrew
