Canon image runner 3025 Manual

Also see for image runner 3025: Network guide network guide

Contents

Before You Start the Remote UI 1-91Using the Remote UIBefore You Start the Remote UIBefore you start the Remote UI, perform the following:■ Specify the Network SettingsSpecify the settings under Network Settings in System Settings (from the AdditionalFunctions screen) and find out the machine's IP address. If you do not know themachine's IP address, consult your network administrator. (See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)■ MEAP SettingsSet Use HTTP in MEAP Settings in System Settings (from the Additional Functionsscreen) to 'On'. (See Chapter 6, "System Manager Settings," in the Reference Guide.) Ifyou are using a default authentication, you do not need to set Use HTTP to 'On'.■ Enable the Remote UISet Remote UI in System Settings (from the Additional Functions screen) to 'On'. It is alsorecommended that Device Information Settings in System Settings is configured.IMPORTANT• Connection via a proxy server is not possible. If your system environment has a proxyserver, perform the following setting. (Settings vary according to the system environment,consult your network administrator.)- Enter the IP address of the machine into Exceptions in the web browser proxy serversettings.• You must set your web browser to enable all cookies and use JavaScript. Otherwise, youwill not be able to change the machine's settings using the Remote UI.• If the control panel of the machine is being used for a particular operation, you cannotperform the same operation using the Remote UI.• If multiple Remote UIs are running simultaneously, the latest setting that was made isenabled. It is recommended that only one Remote UI be running at a time.• To enter characters from a web browser, use the characters that you can enter from thetouch panel display of the machine. If you use the other characters, they may not bedisplayed/recognized properly on the machine.