Copy Settings Table3-2Customizing Settings3Copy Settings TableThe following items can be stored or set in Copy Settings from the AdditionalFunctions screen.*1 Not displayed when the Finisher-J1 is attached.NOTE• An asterisk (*) indicates the default setting.• Two asterisks (**) indicate items that appear only when the appropriate optionalequipment is attached.• For instructions on how to set the modes not described in this manual, refer to theappropriate Operation Manual listed at the beginning of this Copying Guide. (See“Manuals for the Machine,” on p. ii.)• The Copy Settings screen consists of a list of individual settings. Press [] or [] toscroll to the desired setting.Additional Functions Available Settings Applicable PageCopy SettingsStandard Key 1, 2Settings** All modes (No settings*) p. 3-3Auto Collate** On*/Off p. 3-6Image Orientation Priority* 1 On/Off* p. 3-8Job Duration Display** On/Off* p. 3-10Auto Orientation On*/Off p. 3-12Photo Mode** On/Off* p. 3-14Standard Settings** Store, Initialize p. 3-16Store Remote Device** Store (Max 7 printers), Details, Erase, Move ToTop p. 3-21Remote DeviceTransmission Timeout** 5 to 30 sec., 30 sec.* p. 3-27Initialize Copy Settings** Initialize p. 3-29
