| 
7-14Troubleshooting The paper is not loaded properly.Solution Load the paper properly.“Loading Paper” (P.2-9) Damp paper is used.Solution Replace the paper with new paper in an unopened package.“Paper Requirements” (P.2-6) Appropriate paper is not being used.Solution Replace the paper with which can be used with this printer.“Paper Requirements” (P.2-6) There is a foreign object inside the printer.Solution Remove the foreign object inside the printer. Depending on the paper type or the operating environment, the paper may be creased.SolutionChange the settings from the operation panel.e-Manual Maintenance Special ModeThe level of improvement according to the setting option is as following. (low) (high)* Change of paper type or environment may reduce the curl or wrinkle problem, even without changing the setting.* This setting is available when• the is set to , , , or • the is set to , , ,, , or * As you select an option that has higer effect, printing speed becomes slower.Printing Is UnevenPerform one of the following solutions according to the cause. Paper is too moist or Too dry.Solution Replace the paper with new paper in an unopened package.“Paper Requirements” (P.2-6) Toner is nearly out.Solution To view the solution, refer to the following.“Replacing the Toner Cartridge” (P.6-9) The drum in the toner cartridge is deteriorated.Solution Replace the toner cartridge with a new one.“Replacing the Toner Cartridge” (P.6-9) |
