Special Features 5-11Copying5Reserve CopyThis feature allows you to reserve the next job while the machine is printing out acurrent job.NOTEThe machine can store up to 10 copy jobs in memory.1 Press [Stop/Reset] twice to return to the standby display while themachine is printing out.NOTEIt is necessary to return to the standby display in order to reserve the next copy job.2 Place the document to be reserved on the platen glass.For details on how to place documents, see "Placing a Document on the Platen Glass,"on p. 3-3.3 Use the numeric buttons to enter the number of copies.You can set up to 99 copies.4 Adjust any necessary settings for your document.• Press [Image Quality] to select the scanning resolution. (See "Adjusting the ImageQuality (Resolution)," on p. 5-6.)• Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure(Density)," on p. 5-6.)• Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing,"on p. 5-4.)5 Press [Start].The machine begins scanning.NOTE• After printing of the current copy job is complete, the next copy job begins.• If the memory becomes full while scanning, appears in the LCD. Allof the scanned documents will be erased if appears, so divide thedocument and copy each part separately, or select a lower image quality mode andmake copies again.