Canon imageCLASS MF8180C Starter Manual

Also see for Color imageCLASS MF8180c: Basic guide Remote ui guide Network guide Quick start guide Facsimile guide

6112 Close the cartridge cover and lower thescanning platform.If the message is still displayed after closing the cartridgecover and lowering the scanning platform, proceed to thefollowing procedure.13 If the paper jam message is still displayed,unplug the power cord from the wall outlet.14 Turn the lock release levers located on the backof the machine in the direction of the arrow andrelease the lock.15 Hold the grip on the fuser unit and remove it.16 Open the sub-output tray.17 Tilt both the green pressure release lever onthe left and right side of the fuser unit towardsyou to release the pressure in the fuser unit.18 Remove the jammed paper.19 Return the green pressure release levers on thefuser unit to their original positions.20 Close the sub-output tray.21 Hold the grip on the fuser unit and install itsecurely.22 Lock the fuser unit by turning the two lockrelease levers in the direction of the arrow.23 Plug the power cord in the wall outlet to turn onthe machine.If the message is still displayed after turning on themachine, pieces of torn paper may still be remaininginside. Re-check the various sections of the machine andremove all pieces of the jammed paper from inside themachine.Paper Jam in the Drum CartridgeWhen the paper is jammed in the drum cartridge asshown in the figure, remove the jammed paperusing the following procedure.1 Turn the knob on the drum cartridge in thedirection of the arrow.2 Lift the cover (A) and remove the jammed paper(B).3 Return the cover to its original position (A) andturn the knob in the direction of the arrow (B).BAB A62

/ 34

Related manuals for Canon Color imageCLASS MF8180c