Canon imageFORMULA DR-G1100 Production Document Scanner User Manual

Also see for imageFORMULA DR-G1100 Production Document Scanner: Specification Service guide

Contents

7-5Chapter 7 Appendix2. Option SpecificationsThis section contains the specifications for the separately sold Barcode Module (p. 7-3) and imprinters. Refer to “Using PatchcodeSheets (Option)” (p. 3-19) for the specifications of the patchcodes that can be detected by the patchcode decoder.Barcode SpecificationsThe following barcodes can be read by installing the optionalbarcode module.■ Barcode TypesNote: EAN, UPC-A and UPC-E add-ons supported■ Detection ConditionsCode No. of Digits ChecksumEAN 8 or 13 Modulus 10, Weight 3Codabar 3 to 32 (includingStart/Stop characters)Modulus 16, 7 DRCode 39 3 to 32 (includingStart/Stop characters)(Standard ASCII orFull ASCII)Modulus 43ITF 2 to 32 (Evennumber. of digitsonly)Modulus 10, Weight 3Code 128 1 to 32 (Valid dataonly)Modulus 103UPC-A 13 Modulus 10, Weight 3UPC-E 8 Modulus 10, Weight 3Item ConditionPrintedSideFront or back (or both, but at reduced speed)Orientation Perpendicular (0 degrees) or parallel (90degrees) to the feeding directionReading direction should be specifiedbeforehandNote: Speed is slow when both directions arespecified.Size Line Width 0.3 to 1 mm (0.01" to 0.04")When module width exceeds0.508 mm (0.02"), Code 128,UPC-A, UPC-E and EANdetect incorrectlyCode Width 105 mm (4.1") or less(including quiet zone)Bar Height At least 10 mm (0.4")Margins At least one character at eachendSlew Within ±3ºElementRatio2.2 to 3.0PCS Value At least 0.60 (with a white point of at least75% reflectance)FeedingDirection0 degrees 90 degrees