Canon imageFORMULA P-150M User Manual

Also see for imageFORMULA P-: Pocket guide Reference guide

Contents

67Scan with Start ButtonScan First is pre-assigned to the Start button of the scanner, so youcan load a document and then start scanning by pressing the Startbutton.Connecting the Scanner to aComputerWhen scanning with CaptureOnTouch, set the Auto Start switch onthe rear panel of the scanner to the “OFF” position, and then use theUSB cable to connect the scanner to the computer.The power supply USB cable can be connected as necessary.Starting CaptureOnTouchUse the following procedure to start CaptureOnTouch.CaptureOnTouch becomes resident in the system when you start thecomputer, and a CaptureOnTouch icon appears in the taskbar(default). This icon displayed differs as follows depending on thepower status of the scanner.Use the following procedure to start CaptureOnTouch.1 Open the feed tray.For details, see 28 page.2 Click (the CaptureOnTouch icon) in the taskbar andclick [Launch CaptureOnTouch] in the menu thatappears.CaptureOnTouch starts and the main screen appears.HintYou can set the CaptureOnTouch icon to not appear in the menubarwhen you start your computer. For details, see “EnvironmentalSettings” on p. 77.A5A5B5A4LTRB5 A4LTRStart ButtonAuto StartOFF ONIcon MeaningPower is OFF (feed tray is closed)Power is ON (feed tray is open)