Canon imagePROGRAF GP-5300 Online Manual

Also see for GP200: Online manual Installation instructions Service handbook Service manual Service manual

◦ Set printer name◦Specifies the printer name. You can use up to 15 characters for the name.Note• You cannot use the same printer name as that already used for other LAN connected devices.• You cannot use a hyphen for the initial or last character of the printer name.◦ TCP/IP settings◦Performs IPv4 or IPv6 setting.◦ WSD settings◦Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows8.1, and Windows 7).▪ Enable/disable WSD▪Selects whether WSD is enabled or disabled.Note• When this setting is enabled, the printer icon is displayed on the Network Explorer inWindows 10, Windows 8.1, and Windows 7.▪ Optimize inbound WSD▪Selecting Enable allows you to receive the WSD printing data faster.▪ Timeout settings▪Specifies the timeout length.◦ Bonjour settings◦Setting items for LAN using Bonjour.▪ Enable/disable Bonjour▪Selecting Enable allows you to use Bonjour to perform the network settings.▪ Service name▪Specifies the Bonjour service name. You can use up to 48 characters for the name.Note• You cannot use the same service name as that already used for other LAN connecteddevices.◦ SNTP settings◦Performs various settings for SNTP (Simple Network Time Protocol).◦ Spanning tree settings◦Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network.◦ LPR protocol settings◦Enables/Disables the LPR setting.◦ RAW protocol◦Enables/Disables RAW printing.172