Canon imagePROGRAF GP-5300 Online Manual

Also see for GP200: Online manual Installation instructions Service handbook Service manual Service manual

5. Make sure that fingerprint of certificate detail information matches printer's thumbprint.5.To display the printer's root certificate thumbprint in Root cert. thumbprint (SHA-1) or Root cert.thumbprint (SHA-256), tap (Setup) on HOME screen of the operation panel, and then tapPrinter information > System information.6. If fingerprint of certificate detail information matches printer's thumbprint, display6.information on certificate from the menu or by double-clicking the certificate, and selectAlways Trust on Trust.The root certificate registration is completed.Note• If a password is set on your device, entering a password may be required.For Chrome on Android1. Select For secure communication on Remote UI.1.2. Select Download.2.Downloading the root certificate is started and then Name the certificate screen is displayed.3. As entering the root certificate name is required, enter an arbitrary certificate name and3.select OK.The root certificate registration is completed.Note• If PIN or password is not set as security type, the attention screen may appear. Select OK, andthen set the security type to PIN or password.After Root Certificate RegistrationWe recommend that you make sure that the correct root certificate has been registered.To make sure that the correct root certificate has been registered, make sure that thumbprint ofcertificate information matches printer's thumbprint. Follow the steps below.Note• Some Android devices cannot be checked the thumbprint of a registered route certificate.1. From Settings menu on your device, select Security, Trust credentials, and USER.1.The list of downloaded certificates appears.2. Select downloaded certificate.2.The certificate information appears.208