The printer stops during a print jobThe printer stops during a print jobAn error message is shown on the Display Screen ....................................................................................... 100The printer ejects blank, unprinted paper ......................................................................................................... 100An error message is shown on the Display ScreenAn error message is shown on the Display ScreenCause Corrective ActionAn error message is displayed during printing. Check the error message and take action as necessary.(See "Error Messages.") →P.139The last portion of roll paper was used during a print job, and papercould not be advanced because the trailing edge is taped to the roll.Remove the used roll and insert a new roll.(See "Removing the Roll from the Printer.") →P.14(See "Removing Rolls From the Roll Holder.") →User's Guide(See "Loading and Printing on Rolls.") →User's GuideThe printer ejects blank, unprinted paperThe printer ejects blank, unprinted paperCause Corrective ActionThe leading edge of the roll paper wascut to straighten it.The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value otherthan Off in the Control Panel menu.(See "Cutting the Leading Edge of Roll Paper Automatically.") →User's GuideThe Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good condition forprinting.(See "Checking for Nozzle Clogging.") →User's GuideA print job was received from an in-compatible printer driver.Use the correct imagePROGRAF printer driver for the printer and try printing again.The printer is damaged. Contact your Canon dealer for assistance.An error message is shown on the Display Screen iPF6400Basic GuideTroubleshooting The printer stops during a print job100
