Pressing this button in menu items of each tab for which is displayed at left will move to the lower level ofthe menu item, enabling you to execute menu commands or set menu values.Also press this button if the Display Screen indicates to press the OK button.g Back buttonDisplays the screen before the current screen.h Menu buttonDisplays the Tab Selection screen. (See "Menu Settings.") →User's Guidei Cut buttonPressing this button when rolls are loaded cuts the paper, if you have specified Automatic or Eject in CuttingMode in the Control Panel menu. (See "Specifying the Cutting Method for Rolls.") →User's Guidej Feed buttonPressing this button when rolls are loaded enables you to reposition the paper. (See "Feeding Roll Paper Man-ually.") →User's Guidek Load buttonPress this button when loading or replacing paper.(See "Loading Rolls in the Printer.") →P.11(See "Loading Sheets in the Feed Slot.") →P.17l Cut Sheet lamp (green)Lit when Tray or Front Paper Feed Slot is selected as the paper source.m Roll Media lamp (green)Lit when rolls are selected as the paper source.n Message Lamp (orange)• OnA warning message is displayed.• FlashingAn error message is displayed.• OffThe printer is off or is operating normally.o Data Lamp (green)• FlashingDuring printing, the Data lamp flashes when the printer is receiving or processing print jobs. Otherwise,this lamp flashes when the print job is paused or the printer is updating the firmware.• OffThere are no active print jobs when the Data lamp is off.Note• To recover from Sleep mode, any button can be pressed on the Control Panel.Menu OperationsMenu OperationsTo view available menus organized on tabs, select a tab on the Tab Selection screen and press the OK button.For details, see "Menu Settings." →User's GuideiPF6400 Menu OperationsBasic GuidePrinter Parts Operations and Display Screen51
