Note• The only three sheets displayed are the Main sheet, the Page Setup sheet, and the Layout sheet. Some of theprinter driver settings may be disabled.• Apply SharpnessPlace a checkmark here to set the sharpness.Drag the slider bar to the left or right to adjust. You can also adjust by directly entering a number in the numer-ic input field.Note• You can input between 0 and 500.• You can change the numbers by clicking either ▲ button or ▼ button.• You cannot be applied to PDF files.Printing Enlargements of Scanned Originals from a Color imageRUNNERPrinting Enlargements of Scanned Originals from a Color imageRUNNERScanned originals from a Color imageRUNNER can be enlarged and printed automatically.Originals you create by scanning with a Color imageRUNNER are transferred to a "hot folder" and printed automati-cally after enlargement according to printing conditions you specify for that folder.This processing sequence is called the Color imageRUNNER Enlargement Copy function.To use Color imageRUNNER Enlargement Copy, first complete these settings in the following order.1. Register a hot folder on your computer.Register a hot folder on your computer for storing scanned originals from the Color imageRUNNER and com-plete the settings for enlargement copy. For details, see "Creating a New Hot Folder." ➔P.2042. Complete the scanning settings on the Color imageRUNNER.Configure the Color imageRUNNER to send scanned originals to the hot folder.After these settings are complete, you can print enlarged copies of scanned originals from the Color imageRUN-NER.Completing the scanning settings on the Color imageRUNNER.Configure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned originalsto the hot folder if you assign the scanning settings and destination to a Favorites button on the Color imageRUN-NER.For instructions on assigning scanning settings and destinations to a Favorites button, refer to the setting manual,displayed by clicking Color imageRUNNER Enlargement Copy Setup Manual button of Color imageRUNNEREnlargement Copy utility, or refer to the Color imageRUNNER manual.Scanning the original and print an enlargementFollow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer. Fordetailed instructions, refer to the Color imageRUNNER manual.1 Load the original on the platen glass or document feeder of the Color imageRUNNER.2 Press Send to display the screen for transmission.3 Press Favorites, and then press the Favorites button assigned to the hot folder.4 Press Start on the control panel. If you scan originals on the platen glass, after scanning all originals, pressDone on the touch-panel display.Scanned originals are sent to the hot folder and automatically enlarged and printed following the conditionsyou specified for the folder.Printing Enlargements of Scanned Originals from a Color imageRUNNER iPF680User's GuideWindows Software Color imageRUNNER Enlargement Copy210
