InterfaceUSB Format Internal portMode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transferConnector Series B (4-pin)Ethernet Format Internal portSpecification IEEE 802.3 10Base-T,IEEE 802.3u 100Base-TX/Auto-Negotiation,IEEE 802.3ab 1000Base-T/Auto-Negotiation,IEEE 802.3x Full DuplexIEEE 802.3az EEEProtocols SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6)InkFor information on the ink the printer supports, see "Ink Tanks." ➔P.496PaperFor information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displayingthe Paper Reference Guide.") ➔P.329Paper width For information on the paper widths the printer supports, see "Paper Sizes." ➔ P.326Minimum paper length Rolls 203.2 mm (8.0 in)Sheets 279.4 mm (11.0 in)Maximum printable length (*1) Rolls 18 m (19.7 yd)Sheets 1,600 mm (63.0 in)Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)Sheets 0.07–0.8 mm (0.0028–0.031 in)Roll maximum outer diameter 150 mm (6 in) or shorterSupported paper core inner diameter 2 inches / 3 inchesPrint area For details, see "Print Area." ➔ P.579*1: Varies depending on the operating system or application.Roll Holder Set Roll Holder Set RH2-26Stand Printer Stand ST-27Stand(*1) Printer Stand ST-27*1: The stand that is included depends on the region where you purchased the printer.Print AreaPrint AreaA margin required by the printer is added with respect to the size of paper loaded in the printer. Except in border-less printing, the actual printing area corresponds to the paper size minus the space for this margin.Note• Printable Area: The area that can be printed.• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.• Recommended Print Area: We recommend printing within this area.• To print so that your original matches the print area exactly, use an oversized paper size that includes the requiredmargin. (See "Printing on Oversize Paper.") ➔ P.70Margins of Printable Area Margins of Recommended Print AreaTop Edge Bottom Edge Sides Top Edge Bottom Edge SidesSheets 3 mm (0.12 in) 23 mm (0.91 in) 3 mm (0.12 in) 20 mm (0.79 in) 23 mm (0.91 in) 5 mm (0.20 in)Rolls 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 20 mm (0.79 in) 5 mm (0.20 in) 5 mm (0.20 in)iPF680 Print AreaUser's GuideSpecifications Printer Specifications579
