StandStandWhen using an optional Stand, you can store and stack documents printed on rolls.• Printer Stand ST-27a Accessory PocketStores printer accessories.b Output StackerPrinted documents are ejected into the output tray.c Locking CasterLock to immobilize the caster.Before moving the printer, always unlock all four casters. Moving the printer while casters are locked mayscratch the casters or the floor.d Adjustable StopperPull out depending on the paper size when using the output stacker in the Extended position A.For details on the extended position, see "Using the Output Stacker." ➔P.363e Paper GuideGuides printed documents into the output stacker.f Output stacker handleThis handle is grasped and supports the sliding output stacker when putting the output stacker into Exten-ded position B and returning it to the regular position.For details on the extended position, see "Using the Output Stacker." ➔P.363g Output stacker release leverPull this lever towards you to release Extended position B.For details on the extended position, see "Using the Output Stacker." ➔P.363h Output Stacker Ejection GuidesThis guide supports the paper that is output when using the output stacker in Extended position B.Note• The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.• The Stand is normally offered as an optional accessory, but either one or the other of the Stand may be included asa standard accessory in some sales regions and periods.• The output stacker of the Printer Stand ST-26 has a regular position and an Extended position A.For details on the extended position, see "Using the Output Stacker." ➔ P.363• The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look different fromthe appearance of your printer in some cases.iPF680 StandUser's GuidePrinter Parts Optional accessories439
