14 Select the H Borderless Printing check box.15 Click E Fit Paper Size under D Enlarged/Reduced Printing.16 In I Paper Size, click the paper size. In this case, click 10"x12" - Borderless.17 Confirm the print settings, and then click M Print to start printing.Note• For tips on confirming print settings, see "Confirming Print Settings(Mac OS X) →P.327 "Borderless Printing by Resizing Originals to Fit the Roll WidthBorderless Printing by Resizing Originals to Fit the Roll WidthTake advantage of borderless printing to print documents such as posters (made up mainly of photos or images) with-out a surrounding margin, or border.• Borderless PrintingIn regular printing, a margin required by the printer is added around the original. With borderless printing, you canprint documents without the margin, so that the printed image covers the entire surface of the paper.Important• Borderless printing is only available with rolls.• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular widths. Forinformation on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (See "Types ofPaper →P.434 ")• Paper incompatible with the printer's auto cut function can be printed without borders on the left and right sides only.• These features cannot be used in combination with borderless printing: special page layouts, centering originals, andprinting cut lines on rolls.• If Fit Paper Size or Print Image with Actual Size (Windows only) is selected when performing borderless printing,Rotate Page 90 degrees (Conserve Paper) cannot be selected.• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at theedges. If you require higher image quality, specify No in Auto Cut in the printer driver. In this case, the paper can beprinted without borders on the left and right sides only. After ejecting and cutting the printed document, use scissors tocut away the top and bottom edges.• By factory default, the ink drying time is disabled for all paper. When you are using paper that takes longer for ink toadhere for borderless printing and the Cutter Unit touches printing surfaces that are not dry yet, it may damage thepaper or the edge of the document that is cut, depending on frequency of use. In this case, follow these steps to changethe ink drying time.• On the Main sheet of the printer driver, click Settings in Media Type.• Select the ink drying time in the Between Pages list of Drying Time.• Borderless Printing MethodChoose the method of borderless printing that suits the original, as desired.iPF760 Borderless Printing by Resizing Originals to Fit the Roll WidthUser's GuideEnhanced Printing Options Borderless Printing103
