Setting Item Description, InstructionsPaper Details (The type of paperis displayed here.)(*1)CutDustReduct. If you choose On, a line will be printed at the cut position when papercutting is selected. This option reduces the amount of debris given offafter cutting. It also helps prevent adhesive from sticking to the cutterand keeps the cutter sharp if you use adhesive paper. (See "ReducingDust from Cutting Rolls.") →P.460VacuumStrngth Specify the level of suction that holds paper against the Platen. (See"Adjusting the Vacuum Strength (VacuumStrngth).") →P.565Scan Wait Time Specify the time to wait for the ink to dry between each scan (after theprinthead finishes moving in one direction), in consideration of howquickly the ink dries. Also specify the applicable area for the ink dryingtime. Select Entire area to apply the ink drying time after each scan un-til the document is fully printed. Select Leading edge to apply the inkdrying time after each scan only in the area 110–140 mm from the lead-ing edge. (The applicable length varies depending on the Print Qualitysetting.) Note that printing will take longer if you specify the Scan WaitTime setting. In particular, when Leading edge is selected, colors maybe uneven in the boundary between the areas with and without a dryingtime.Roll DryingTime Specify the time to wait for the ink to dry for each sheet.NearEnd RollMrgn Specify the minimum margin at the leading edge of roll paper to ensurebetter printing quality at the leading edge.Note that if you choose 3mm, it may lower the printing quality at theleading edge and affect feeding accuracy. The printed surface may bescratched, and ink may adhere to the leading edge. It may also causethe Platen to become soiled.NearEnd Sht Mrgn Specify a margin at the leading edge of sheets to ensure better printingquality at the leading edge.Note that if you choose 3mm, it may lower the printing quality at theleading edge and affect feeding accuracy. The printed surface may bescratched, and ink may adhere to the leading edge.Bordless Margin Adjust the margin during borderless printing.Choose Automatic to have the printer automatically detect the paperwidth and configure the margin settings for borderless printing. If mar-gins are mistakenly created when Automatic is selected, chooseFixed. In this case, the paper width is not detected automatically, andthe document is printed without borders, using the margin settings re-quired by the printer.Width Detection Specify this option to print inside boundaries or in other cases whenspecifying a particular starting position for printing. (See "Printing Froma Desired Starting Point.") →P.463Paper width and skew are not detected if you select Off. If paper is loa-ded askew, note that paper jams or Platen soiling may occur.Return Defaults Choose OK to restore Paper Details to the default values.Paper Details Print the paper settings as specified in Paper Details.Keep Paper Type Select On when printing on a particular type of paper regularly. (See"Changing the Type of Paper.") →P.445*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types of Paper.") →P.434 Thetypes of paper indicated in the printer driver and related software (as well as on the Control Panel) are updated when you install theprinter driver from the User Software CD-ROM or if you update paper information by using the Media Configuration Tool. (See MediaConfiguration Tool Guide (Windows) →P.309 or Media Configuration Tool Guide (Macintosh) →P.416 .)Menu Settings iPF760User's GuideControl Panel Printer Menu496
