Canon imageRUNNER 2520 Series Service Manual

Also see for imageRUNNER 2520 Series: Service manual

4-34Using the Mode#SSSW# N U M E R I C# N U M E R I C2) Selecting a Menu ItemSelect the Menu item using the[left arrow]/[right arrow] on thetouch panel.3) Press [OK].5) Registering/Setting DataEnter data using the keypad,and then press [OK].6) Press the [Stop]/[Additionalfunctions]/[Reset] key to endthe service mode.# N U M E R I C# N U M E R I C0 0 10 0 10 0 20 0 200104) Selecting a PrarameterSelect the Prarameter using the[left arrow]/[right arrow].1) Selecting Service Mode# S S S W3) Selecting a Menu ItemPress [OK].2) Press [OK] on thetouch panel.5) Registering/Setting DataEnter data using the keypad,and press the [OK].6) Press the [Stop]/[Additionalfunctions]/[Reset] key to endthe service mode.0 3 34) Selecting a Bit SwitchSelect the bit using the[left arrow]/[right arrow] onthe touch panel.# S S S W# S S S W000000000000000000 0 3 3# S S S W 0000000000 3 3# S S S W 000000001> 2 > 8 >1) Selecting Service Mode> 2 > 8 >F-4-1F-4-1Setting of Bit SwitchOutlineBit Switch CompositionThe items registered and set by each of these switches comprise 8-bit switches. The figurebelow shows which numbers are assigned to which bits. Each bit has a value of either 0 or 1.001#SSSW0 0 0 0 0 0 0 0Bit 7Bit 6Bit 5Bit 4Bit 3Bit 2Bit 1Bit 0CAUTION:Do not change service data identified as "not used"; they are set as initial settings.F-4-2F-4-2All manuals and user guides at all-guides.com