Canon imageRUNNER 2520 Series Service Manual

Also see for imageRUNNER 2520 Series: Service manual

4-254(#SCAN> FEEDER> FUNCTION> FAN-ON)Starting the fan operation.Selecting 1 starts fan operation.(#SCAN> FEEDER> FUNCTION> SL-CHK)Checking the ADF solenoid.Specify a solenoid to perform a solenoid check. Select #SCAN>FEEDER > FUNCTION > SL-ON to execute this.0: Pressure solenoid (SL1)1: Stamp solenoid (SL2)(#SCAN> FEEDER> FUNCTION> MTR-ON)Starting the motor operation.Selecting 1 start motor operation.(#SCAN> FEEDER> FUNCTION> ROLL-ON)ADF roller cleaning mode.Rotate the roller with the motor and attach a lint-free paper moistened with alcohol to theroller to clean it.(#SCAN> FEEDER> FUNCTION> FEED-ON)Checking the passage of paper with ADF.Selecting 1 starts checking passage of paper by the ADF.#PRINTNumerin Parameter Settings (Numeric Prama).Item No. Default Setting range Function#PRINTNUMERICSW01- SW13 Not usedSW14: 00000100 Special mode settingSW15: -SW17:Not usedSW18: 00000100 Special mode settingSW19: - 50: Not used#PRINTNUMERIC01: - 30: Not used34: 100 '-128 to 127, oneunit = 0.1 mmLeft-end registration adjustment (manualfeed tray)35: 100 '-128 to 127, oneunit = 0.1 mmLeft-end registration adjustment (cassette 1)36: 100 '-128 to 127, oneunit = 0.1 mmLeft-end registration adjustment (cassette 2)37: 100 '-128 to 127, oneunit = 0.1 mmLeft-end registration adjustment (cassette 3)38: 100 '-128 to 127, oneunit = 0.1 mmLeft-end registration adjustment (cassette 4)39: - 52: Not used53: 25 0 to 9999, oneunit = 0.1 mmAdjustment of margin at leading edge ofcopy54: 25 0 to 9999, oneunit = 0.1 mmAdjustment of margin at trailing edge ofcopy55: 25 0 to 9999, oneunit = 0.1 mmAdjustment of margin at right edge of copy56: 25 0 to 9999, oneunit = 0.1 mmAdjustment of margin at left edge of copy57: Not used58: 145 '-128 to 127, oneunit = 0.1 mmAdjustment of the registration loop volume(Manual tray)59: 163 '-128 to 127, oneunit = 0.1 mmAdjustment of the registration loop volume(Cassette)60: Not used61: 145 '-128 to 127, oneunit = 0.1 mmAdjustment of the registration loop volume(Duplex unit)62: 7 0 to 14 Temperature adjustment UP/DOWN mode(For normal paper)63: 7 0 to 14 Temperature adjustment UP/DOWN mode.(For thick paper)64: 2 0 to 4 Mode for preventing the end temperaturerise65: 0 0 to 2 Mode for reducing sand image66: 0 0 to 3 Temperature/ Humidity sensor fixed mode67:- 135: Not used136: 1000 '-512 to 512 Adjustment of the point to start writing inmain scanning direction (A)137:- 139: Not used140: 100 '-128 to 127, oneunit = 0.1 mmLeft-end registration adjustment (double-sided small)All manuals and user guides at all-guides.com