Canon imageRUNNER 2545 Series Service Manual Digest

Also see for imageRUNNER 2535: Printer guide User guide Client guide User guide Easy operation guide

Contents

4-94Bit Function 1 02 not used - -3 not used - -4 not used - -5 not used - -6 not used - -7 not used - -Detailed Discussions of Bit 0Selects a No Paper display for when; either the fax paper cassette or multitray is empty, or forwhen the same size paper is all used up.Detailed Discussions of Bit 1Selects whether to check the side cassette when checking if the same size paper is all usedup.SSSW-SW18List of FunctionsBit Function 1 00 detection of carrier between DCS and TCF detect do not detect1 wait time for carrier between DCS and TCF 600msec 300msec2 not used - -3 not used - -4 not used - -5 not used - -6 not used - -7 not used - -Detailed Discussions of Bit 0For reception, the absence of the carrier between DCS and TCF may be detected. If themachine returns FTT while the other party (PC-FAX in particular) is sending TCF to cause areception error, be sure to set the bit to ‘1’. If the error still occurs, set bit 1 of #1 SSSW SW18to ‘1’. This function is valid only when the machine uses an R288F modem.Detailed Discussions of Bit 1For reception, the length of time during which the absence of the carrier is detected betweenDCS and TCF may be set. This bit is valid when ‘1’ is set to bit 0 of #1 SSSW SW18.T-4-16T-4-16T-4-17T-4-17SSSW-SW22List of FunctionsBit Function 1 00 not used - -1 not used - -2 not used - -3 Prohibit manual polling Yes No4 not used - -5 not used - -6 not used - -7 not used - -Detailed Discussions of Bit 3Selects whether to prohibit by manual polling (off hook key + start key).SSSW-SW25List of FunctionsBit Function 1 00 Transmission telephone numbers displayed on reportsfrom CSIOther faxnumber Called number1 not used - -2 If void CSI has been received, handle as non-receivedCSI. Yes No3 Menu display of message language Display Do not display4 not used - -5 not used - -6 not used - -7 not used - -Detailed Discussions of Bit 0Selects the transmission telephone number displayed on reports after the completion oftransmission.When “Called number” is selected, the telephone number the fax called is displayed onreports.When “Other fax number” is selected, the telephone number sent from the other fax (the CSIsignal data) is displayed on reports.Detailed Discussions of Bit 2At "1" on this Bit, ignore the void CSI if received and if the dial has been made at this point,T-4-18T-4-18T-4-19T-4-19