Communication Environment Setup 2-132Settings Common to the Network Protocols2 Specify the settings for SNMP v. 3.[On] for following procedures.NOTEAn SNMP v. 3 user with the following settings is registered by default. Delete orchange these settings as necessary.- User: initial- MIB Access Permission: Read/Write- Security Settings: Auth Yes/Encrypt Yes- Authenticat. Algorithm: MD5- Authent. Password: initial- Encryption Password: initial● If you want to add an SNMP v. 3 user:❑ Press [User Settings] ➞ [Register] ➞ specify the user name, MIB permissions,and security settings.If you select [Auth Yes/Encrypt Yes] from the Security Settings drop-down list,select the authentication algorithm ➞ enter the passwords for authenticationand encryption. If you select [Auth. Yes/Encrypt. No] from the SecuritySettings drop-down list, select the authentication algorithm ➞ enter thepassword for authentication.● If you want to confirm or change the SNMP v. 3 user settings:❑ Press [User Settings] to select the user whose settings you want to confirm orchange ➞ press [Details/Edit].Confirm the displayed information ➞ change the settings if necessary.● If you want to erase an SNMP v. 3 user:❑ Press [User Settings] to select the user whose settings you want to erase ➞press [Erase].
