Finisher-F1/Saddle Finisher-F2/Puncher Unit-B1 7-117Optional EquipmentFinishing FunctionsThe Finisher is equipped with the following functions.NOTEThe tray moves down when each set of paper is delivered. When the delivered paperreaches the stacking limit of the tray, the paper is automatically delivered to anothersuitable tray. When the paper reaches the stacking limit of all of the suitable trays, printingstops temporarily. After you remove the delivered paper from the tray, the tray moves upthe corresponding distance and printing of the remaining sets resumes. Collate ModeThis function automatically collates print sets into page order before they are delivered. Group ModeThis function outputs all prints of the same page in one set and slightly shifts the outputposition of the other print sets to make them easier to handle. Offset ModeThis function outputs papers by shifting them to the front.IMPORTANTYou cannot set the Offset mode when printing on STMTR-size paper.NOTEWhen the Collate or Group functions are set or prints are output from a computer, theoutput papers are shifted about 1 1/4" (30 mm) before delivery.aaaa Upper CoverOpen to remove jammed paper.bbbb Top Cover of the Puncher UnitOpen this cover when a paper jam occurs in thepuncher unit.cccc Front Cover of the Puncher UnitOpen this cover when a paper jam occurs in thepuncher unit, or when removing punch waste.dddd Upper Front CoverOpen this cover to replace the staple case in thestaple unit, or when a staple jam occurs.eeee Lower Front CoverOpen this cover when a paper jam or staple jamoccurs in the saddle stitcher unit, or whenreplacing the saddle stitcher unit’s staplecartridge.* Only available with the Saddle Finisher-F2.ffff Booklet TrayThe paper that is folded and stapled at the centerto form a booklet is delivered to this tray.* Only available with the Saddle Finisher-F2.gggg Output Tray BPapers are output to these trays. Assignspecified functions to output to a designated tray.hhhh Output Tray A
