Card Reader-C1 7-47Optional Equipment7Card Reader-C1When the Card Reader-C1 (optional) is attached to the main unit, you must insertthe control card before operating this machine. The Card Reader-C1 controlsDepartment ID Management automatically.IMPORTANT• If you use a login service other than Default Authentication, Limit Functions setting is notavailable.• If SSO is set as a login service, you cannot use the Card Reader-C1 (optional).• If SDL is set as a login service, enter your card number in the card ID field. See theMEAP SMS Administrator Guide for details.NOTE• If the Basic Features screen does not appear on the touch panel display even when thecontrol card is inserted, make sure that:- The control card is inserted in the correct direction.- The control card is inserted as far as it can go.- An unusable control card is not inserted.• Insert the usable control card correctly.• For instructions on how to turn the power ON, see “Main Power and Control PanelPower,” on p. 1-32.• When the Card Reader-C1 (optional) is attached, the following two types of cards can beused:- The optical card can manage up to 200 departments.- The magnetic card can manage up to 3,000 departments.• The maximum number of departments that can be managed, depends on the machine.The imageRUNNER 6020i/5020i and imageRUNNER 6020/5020 can manage up to1,000 departments.CONTROL CARD1 2 3CONTROL CARD III0011 2 3Magnetic Card Optical Card
