What This Machine Can Do 1-13Before You Start Using This Machine1NOTE• Settings made from the Additional Functions screen are not changed even if youpress (Reset).• For instructions on how to customize settings, see Chapter 3, “Customizing Settings.”• For instructions on how to specify the System Settings, see Chapter 4, “System ManagerSettings.”• [Communications Settings], [Address Book Settings], [Forwarding Settings], and[Manage/Access to Address Book] are not displayed on the imageRUNNER 6020/5020.• [Printer Settings] is displayed only if the Network Multi-PDL Printer Kit is attached.• [Network Settings], [Remote UI], and [Clear Message Board] are displayed only if theNetwork Kit is attached.• [Report Settings] is displayed only if the Network Kit or Network Multi-PDL Printer Kit isattached.• For instructions on how to specify the Printer Settings, see the PS/PCL Printer Guide.• For instructions on how to specify the Network Settings, see the Network Guide.• [Auto Online/Offline] is only displayed if the Network Scan Function is attached.Functions That Conserve PowerYou can conserve power efficiently using the following modes when the machine isnot being used.NOTE• After the machine wakes up from being in one of these modes, there will be a slight delayin starting to use the machine.• The touch panel display turns OFF when the machine enters one of these modes.• You can continue to print data sent from a computer when the machine enters one ofthese modes. Energy Saver ModeWhen the machine will not be used for a prolonged period of time, press (EnergySaver) to put the machine into the Energy Saver mode. This reduces the temperature ofthe machine’s fixing unit, and thereby conserves energy. To start operations again,press (Energy Saver) once more. Pressing the control panel power switch alsoreactivates the machine.NOTEThe following Energy Saver mode settings can be selected: ‘–10%’, ‘–25%’, ‘–50%’, and‘None’. (See “Changing the Energy Saver Mode Setting,” on p. 3-19.)
