Aligning the Print Head Position from Your ComputerPrint head alignment corrects the installation positions of the print head and improves deviated colors andlines.This printer supports two head alignment methods: automatic head alignment and manual head alignment.Normally, the printer is set for automatic head alignment.If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.The procedure for performing automatic print head alignment is as follows:Print Head Alignment1. Open the printer driver setup window2. Click Print Head Alignment on the Maintenance tabThe Start Print Head Alignment dialog box opens.3. Set the paper thickness lever to the right, and load paper in the printerLoad one sheet of A4 size or Letter size Matte Photo Paper (MP-101) into the rear tray.Note• The type of media and number of sheets to be used differ when you select the manual headalignment.4. Execute head alignmentMake sure that the printer is on and click Align Print Head.Follow the instruction in the message.Important• Do not open the print head cover while printing is in progress.Note• Wait until printing ends before performing other operations. Printing takes about 4 minutes tocomplete.Note• To print and check the current setting, open the Start Print Head Alignment dialog box, and click PrintAlignment Value.146Downloaded from ManualsPrinter.com Manuals
