Printing on PostcardsThis section describes the procedure for postcard printing.1. Load postcard on the printer2. Open the printer driver setup window3. Select commonly used settingsDisplay the Quick Setup tab, and for Commonly Used Settings, select Standard.4. Select the media typeFor Media Type, select Hagaki A, Ink Jet Hagaki, Hagaki K, or Hagaki.Important• This printer cannot print on postcards that have photos or stickers attached.• When printing on each side of a postcard separately, you will get cleaner printing if you print themessage side first and then print the address side.5. Select the paper sizeFor Printer Paper Size, select Hagaki 100x148mm or Hagaki 2 200x148mm.Important• Return postcards can be used only when you print them from the computer.• When printing a return postcard, always set the paper size to Hagaki 2 200x148mm from yourapplication software or the printer driver.• Do not fold the return postcard. If a crease is formed, the printer will not be able to feed thepostcard properly, and this condition will cause line shifts or a paper jam.• With return postcards, borderless printing cannot be used.6. Set the print orientationTo print the address horizontally, set Orientation to Landscape.7. Select the print qualityFor Print Quality, select High or Standard, whichever best suits the purpose.8. Complete the setupClick OK.When you execute printing, the data will be printed onto the postcard.Important• When you execute postcard printing, a guide message is displayed.When the guide message is displayed, select Do not show this message again if you do not want anyguide messages to be displayed.To display guide messages again, open the Maintenance tab and click View Printer Status to start the309Downloaded from ManualsPrinter.com Manuals
