3. Select a stampCheck the Stamp check box, and select the stamp to be used from the list.The current settings are displayed in the settings preview on the left side of the Page Setup tab.4. Set the stamp detailsIf necessary, specify the following settings, and then click OK.Define Stamp... buttonTo change the stamp text, bitmap, or position, click this.Place stamp over textTo print the stamp on the front of the document, check this check box.Note• The stamp is given priority because the stamp is printed over the document data in thesections where the stamp and the document data overlap. When this check box isunchecked, the stamp is printed behind the document data and may be hidden in theoverlapping sections depending on the application software used.• Place stamp over text cannot be used when the XPS printer driver is used.When the XPS printer driver is used, the stamp is normally printed in the foreground of thedocument.Print semitransparent stampCheck this check box to print a semi-transparent stamp on the document.This function is available only when the XPS printer driver is used.Stamp first page onlyTo print the stamp only on the first page, check this check box.5. Complete the setupClick OK on the Page Setup tab.When you execute print, the data is printed with the specified stamp.Printing a BackgroundTwo bitmap files are pre-registered as samples.1. Open the printer driver setup window2. Click Stamp/Background... on the Page Setup tabThe Stamp/Background dialog box opens.3. Select the backgroundCheck the Background check box, and select the background to be used from the list.The current settings are displayed in the settings preview on the left side of the Page Setup tab.4. Set the background detailsIf necessary, complete the following settings, and then click OK.299Downloaded from ManualsPrinter.com Manuals
