Printing Does Not StartCheck1 Make sure that the power plug is securely plugged in, then touch the ON buttonto turn the machine on.While the POWER lamp is flashing, the machine is initializing. Wait until the POWER lamp stops flashing andremains lit.Note• When printing large data such as a photo or graphics, it may take longer to start printing. While thePOWER lamp is flashing, the computer is processing data and sending it to the machine. Wait until printingstarts.Check2 Make sure that the machine is connected to your computer properly.When the machine is connected to your computer with a USB cable, make sure that the USB cable is securelyplugged in to the machine and the computer, then check the followings:• If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to thecomputer, and try printing again. If printing starts normally, there is a problem with the relay device. Consultthe reseller of the relay device for details.• There could also be a problem with the USB cable. Replace the USB cable and try printing again.When you use the machine over LAN, make sure that the machine is connected to the network with a LAN cableor is set up correctly.Check3 If you are printing from the computer and there are any unnecessary print jobs,delete them.Deleting the Undesired Print JobCheck4 Make sure that the inner cover (the cover of the disc tray) is closed.If the inner cover is opened, close the inner cover and tap OK on the touch screen.Check5 Are the Media Type and the Page Size settings of the printer driver correct?When using non Canon genuine specialty paper, be sure to select the proper media type or page size correctlyin the printer driver.Confirm the settings following the procedure below, and try printing again.1. Make sure that either A4 (Art Paper Margin 35) or US Letter (Art Paper Margin 35) is selected in theapplication.If the page size you want to use is not displayed, open the File menu of the application and select Print.Then make sure that the name of your printer is selected.2. Make sure that the paper selected for Media Type in the Print dialog in the printer driver matches thepaper loaded in the machine.3. Make sure that the Paper Size setting in the Page Setup dialog in the printer driver is the same as the sizeset in step 1.Check6 Make sure that your machine's name is selected in the Print dialog.The machine will not print properly if you are using a printer driver for a different printer.Make sure that your machine's name is selected in Printer in the Print dialog.43
