Paper Is Smudged/Printed Surface Is ScratchedPaper Is SmudgedThe Edges of Paper Are Smudged Printed Surface Is SmudgedPrinted Surface Is ScratchedCheck1 Did you confirm the paper and print quality settings?Print Results Not SatisfactoryCheck2 Is the appropriate type of paper used? Check the followings:• Check to see if the paper you are printing on is suitable for your printing purpose.Media Types You Can Use• When performing Borderless Printing, make sure that the paper you are using is suitable for BorderlessPrinting.If the paper you are using is not suitable for Borderless Printing, the print quality may be reduced at the topand bottom edges of the paper.Printing AreaCheck3 Load the paper after correcting its curl.When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is. If you rollup this paper to flatten, this may cause cracks on the surface of the paper and reduce the print quality.We recommend putting unused paper back into the package and keeping it on a level surface.• For Plain PaperTurn the paper over and reload it to print on the other side.• For Other PaperIf the curl on the four corners of the paper is more than 0.1 inch / 3 mm (A) in height, the paper may besmudged or may not be fed properly. In such cases, follow the procedure described below to correct thepaper curl.60
