53E Advanced FunctionsChanging the Settings (1)5. Press the FUNC. button. Use the auto setting for normal outdoor scenes. Depending on the type of fluorescent light, optimal color balance cannot beaccomplished with [FLUORESCENT] or [FLUORESCENT H]. If the color looksunnatural on the screen, adjust using [AUTO] or [SET]. The camcorder retains the custom white balance setting even if you turn it off. When you want to use a previously made [SET] setting, after selecting [ SET]in step 3, press the FUNC. button without pressing the SET dial. When you have set the custom white balance:- Depending on the light source, “ ” may keep flashing. The result will still bebetter than with the auto setting.- Reset the white balance when the lighting condition changes.- Turn off the digital zoom. Custom white balance may provide better results in the following cases:- Changing lighting conditions- Close-ups- Subjects in a single color (sky, sea or forest)- Under mercury lamps or certain types of fluorescent lightsDownloaded From VideoCamera-Manual.com Manuals
