Canon zr10. Instruction Manual

Contents

31EQuick Overview• If you are going to use the TV as a monitor while you are shooting, rememberto keep the TV volume turned down as long as the camera’s audio terminals areconnected. If the sound from the TV speakers is picked up by the microphone,an unpleasant high-pitched squeal, called feedback, may be produced.• For TVs having the Video ID-1 system:If you connect the camera to the TV’s S terminal or video in terminal,recordings made in the 16:9 mode for wide screen TVs will automatically playback in wide screen mode on the TV screen.If your TV (or VCR) has audio/video input terminalsVIDEOINPUTAUDIOLRA/VMICIN/OUTm• Connect the camera using the STV-250 Stereo Video Cable. Connect the whiteplug to the white audio terminal L (left). Connect the red plug to the red audioterminal R (right). Connect the yellow plug to the yellow video terminalVIDEO.• If you are connecting the camera to a TV, set the TV/VIDEO selector on thetelevision to VIDEO.• If you are connecting the camera to a VCR, set the input selector on the VCR toLINE.STV-250 Stereo Video Cable2_ZR10_E(07-33) 3/10/00 18:20 Page 31 (1,1)