-61-Maintenance 5Drive Belt1. Remove upper rear cover.2. Check V-belt tension. Inspect that the lengthA of spring is within the range of 135mm+/-3mm. If it is out of this range, adjust springwith adjust nut.3. Visually inspect belt. Replace belt if it isdamaged. For replacement, contact yourCANYCOM representative.4. Install upper rear cover back in place.• Adjust belt tension properly. Inproperly tensioned belt may reduce performanceand its service life.Adjust NutSpring5321M-0508-100EＡA5323M-0508-030E
