CAPINTEC, INC CAPTUS® 2000NORMAL VALUESThe Normal Values module stores normal values for percent Thyroid Uptake, Schilling Test,DICOPAC® Test, and RBC Survival Test. Normal value ranges are listed on the printedresult reports, and any patient results which exceed these ranges are flagged. To inputinformation for normal values, select Normal Values... from the drop down list under Setup.Figure 4-9 will appear.Figure 4-9NOTE: The normal values shown above are for demonstration purposes only and are notsuggested by CAPINTEC for clinical use.To enter normal value ranges, place the arrow over the desired box and click. Then type inthe correct value. Note that all percent values must be a number between 1 and 100.For Thyroid Uptake you may enter up to three normal value ranges in percent for threedifferent times after administration of the dosage. Enter the time in hours and the uptakeresult in percent. Note that the normal value ranges will only apply to thyroid uptakes whichare measured within ±1 hour of the stated normal value range. Uptake results outside thenormal value range for other times will not be flagged.July 00 SYSTEM SETUP 4-7
