CarNetix PSU-PC19 DC Installation Manual
                            | |
Contents
| 
CarNetix PSU-PC19 V2.0 Installation Manual2.0 Installing the PSU-PC19The following section is a summary of the installation of the PSU-PC19 and Xenarc SC8 computer.2.1 Before You BeginBefore you begin the installation, make sure you take the time to read through these instructions.The PSU-PC19 is a sophisticated, microprocessor-based device. Please read these instructionscarefully and contact us either in our Support Forum (www.carnetix.com/forum) or via email(support@carnetix.com) if you have any questions or problems.It is assumed that you have a basic to advanced understanding of electronics. It would be helpful,and is highly recommended (especially if you plan to get much further involved in CarPCs) that youpurchase, as a minimum, a simple VOM (volt-ohm meter) or DMM (Digital Multi-Meter). Thesedevices are inexpensive (starting around $20) and will save you and me a great deal of time. Theycan be purchase over the web or at your local retail electronics store (Radio Shack, Home Depot,some hardware stores, some auto parts stores).Installation of the PSU-PC19 consists of :• Setting the Jumpers• Connecting the Wires.2.2 Setting the JumpersIt is very important to set the jumpers before applying power to the PSU-PC19. The location andfunction of the jumpers is presented below. More detail on the specific operation of each jumperselectable function appears later paragraphs.Jumper FunctionsJP1 Pulse Start InputDeadman TimerHibernate/StandbyShutdown Delay TimeJP2 +5V/+12V/+13V SelectJP3 ACPI Relay OutputJP4 Secondary Output ControlJP5 Secondary Output SourceJP6 +18V/+19V/+20V Select- 9 - |
Related manuals for CarNetix PSU-PC19 DC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine