CareFusion Alaris 8110 series Service Manual

Also see for Alaris 8110 series: User manual

Contents

CareFusion Alaris 8110 series Service Manual Manual pdf 50 page image

5.2.6 Removing IUI Board Assembly1. If present, remove Retainer Clip fromDual Connector Cable-IUI Boardconnection.2. Disconnect Dual Connector Cable fromIUI Board J2 .3. Disconnect Syringe Size Sensorharness from IUI Board J4 .4. Disconnect Flex Cable from IUI BoardJ3 .5. Use small diagonal cutters to lift andremove snap rivet from IUI Board.6. Remove IUI Board Assembly.During Reassembly:Route Dual Connector Cable and SyringeSize Sensor harness under IUI SupportBracket.CORRECTIVE MAINTENANCESyringe Module5A-8 Alaris ® Syringe Module (8110 Series)Alaris ® PCA Module (8120 Series)Technical Service Manual5.2 DISASSEMBLY/REASSEMBLY (Continued)Dual Connector CableIUI Board AssemblySnap RivetFlex CableSyringe SizeSensorHarnessIUI Support BracketDo not cut rivet.CAUTIONRetainer Clip