Carmanah 800 Series User Manual
                                      | |
Contents
| 
800 SERIES USER MANUALPROGRAMMINGEditing the Lantern Date and Time(Non-GPS Units Only)Lantern Date and Time are used for data loggingand for controlling the calendar function. The 800Series lantern (without GPS) has an internal clockwhich it uses for logging activity. The lantern will befactory programmed in Coordinated Universal Time(UTC). You may re-program the lantern to local dateand time if desired. In the event that the lanternbattery pack is disconnected, verify the date settingsand reset if required.GPS-equipped units will besynchronized to CoordinatedUniversal Time (UTC). The date/timesettings on GPS-equipped unitscannot be modified.To edit the lantern date:1. If you have not already done so,establish a connection to thelantern.2. The lantern LEDs will flash toconfirm the lantern is ready toreceive commands.3. Navigate to the date menu4. Scroll to the Month value (ΠΠon)5. Unlock the existing setting6. Use the number keys to enter thecurrent month.7. Lock the new setting8. Scroll to the Day value (dAY)9. Use the number keys to enter thecurrent day.10. Lock the new settingThe lantern LEDs will flash to confirmthat the new setting has been locked.To edit the lantern time:1. If you have not already done so,establish a connection to thelantern.2. The lantern LEDs will flash toconfirm the lantern is ready toreceive commands.3. Navigate to the Time menu4. Scroll to the hour value (HH)5. Unlock the existing setting6. Use the number keys to enter thecurrent hour (24-hour clock).7. Lock the new setting8. Scroll to the minute value (MM)9. Use the number keys to enter thecurrent minute10. Lock the new setting11. The lantern LEDs will flash toconfirm that the new setting hasbeen locked.15 © 2014, Carmanah Technologies Corporation. Revised July 2014. 69928_8XX_UserManual_RevB |
Related manuals for Carmanah 800 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine