Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customerservice@carmanah.com | carmanahtraffic.com 32G SERIES USER MANUAL3.0 SOLAR PANEL AND CABINET INSTALLATION3.6 Installation of Cabinet Terminals1. Install push button harness: connect red push button wire terminal to INPT+, black push button wire to INPT−,torque terminal screws to 12 in-lb.2. Install flashing beacon harnesses:• For round beacons and LED enhanced signs, match the red/black wires to the RD/BK text in the Roundcolumn of the LED label.• For RRFBs, match the black/white/red/green wires to the BK/WT/RD/GN text in the RRFB column ofthe LED label.• Torque screws to 12 in-lb and secure cable jackets to chassis with cable ties.All B1+ terminals are wired in parallel. Similarly, all B1−, B2+, and B2− terminal are also wiredin parallel with their identically-named counterparts. As a result, all beacons wired to B1+/−terminals will flash together; beacons wired to B2+/− will flash together etc. etc.
