Carrier 30MP Installation And Startup Manual

Appendix C: 30MP Multi-chiller Points/Properties30MP Multi-chiller CARRIER CORPORATION ©2018Installation and Start-up Guide All rights reserved46AI Setpoint – The current voltage of the controller's external chilled water setpointsensor input. Allowable input range is 1-5 Vdc.R: 0 to 5 VdcOAT Sensor – The value of the controller's outdoor air temperature sensor input, prior toany operator-configured Calibration Offset.R: -56 to 245°FLeaving Chilled Water Header Temp – The value of the controller’s leaving chilled waterheader temperature sensor input, prior to any operator-configured Calibration Offset.R: -56 to 245°FExt Demand Limit – The external demand limit input's current state. R: Off/OnRemote Occupancy Contact – The remote occupancy contact input's current state. R: Open/ClosedTower Fan Speed – The assigned output channel's current commanded, configuration-dependent, fan output.R: 0 to 100%Alarm Lamp – The assigned output channel's current commanded, configuration-dependent, output.R: Off/On