ECG–UG–14-002 REVISION DATE PAGE30XAXWBACnet Option Rev G December 2016 52 OF 56Back to Beginning of Chapter – Table of Contents6.2 How to modify the unit IP addressIn order to modify the unit IP address, please perform the following steps:Step Action1. Press on the screen and hold for about 4 seconds to access the Setup menu.2. Press the Network field to display the menu presented below.IMPORTANT:You must request an IPaddress, subnet mask anddefault gateway from thesystem administrator beforeconnecting the unit to thelocal Ethernet network.3. Press the TCP/IP Address field. Enter the new IP address.4. Press the OK button to confirm the new IP address.
